Chapter 1 Using the Operator Panel1-21Resetting the Type AdjustResets the custom settings (Custom1 to 8) that are set inCustomizing Paper Type on page 1-19.Press the MENU key.Press the or key repeatedly until PaperHandling > appears.Press the key.Press the or key repeatedly until >ResetType Adjust appears.Press the ENTER key. A question mark (?) appears.Press the ENTER key. All the customized paperweight and duplex path settings will be reset to thedefault. The message display returns to Ready.The print density can be adjusted in five steps: from 01 (light)to 05 (dark). The default setting is 03.Press the MENU key.Press the or key repeatedly until PaperHandling > appears.Press the key.Press the or key repeatedly until >TypeAdjust > appears.Press the key.Press the or key repeatedly until >>PrintDensity appears.Press the ENTER key. A blinking question mark (?)appears.Select the print density from five steps from 01(light) to 05 (dark) using the or key.Press the ENTER key.Press the MENU key. The message display returns toReady.This finishes the custom paper type settings.Paper Handling >>Reset TypeAdjust>Reset TypeAdjust ?123456Adjusting Print DensityPaper Handling >>Type Adjust >Custom 1>>Print Density03>>Print Density? 0312345678910