Chapter 1 Using the Operator Panel1-10This section explains the procedures to print out the print-er’s internal information.You can print out such information as the set menu, printer’sstatus, font list as well as dump list of received data in hexa-decimal.The printer prints a full list of menu selection system. Notethat menus indicated on the list may vary depending onwhich option units are installed on the printer.Press the MENU key.Press the or key repeatedly until Print MenuMap appears.Press the ENTER key. A question mark (?) appears.Press the ENTER key again. The printer prints amenu map.If you want to check the printer’s current status, includingmemory available and option settings, you can find the infor-mation you need on the status page.Press the MENU key.Press the or key repeatedly until PrintStatus Page appears.Press the ENTER key. A question mark (?) appears.Press the ENTER key again. The printer prints astatus page.For a full description of the status, see the followingPrinting Service Status Page on page 1-11.The following is a sample status page. The numbers below re-fer to the contents explained on the next page.PrintingPrinting Menu MapPrintMenu MapPrintMenu Map ?1234MENU MAPPrinting Status PagePrintStatus PagePrintStatus Page ?NOTE1234STATUS PAGE0 100Hardware InformationPage InformationNetwork StatusMemoryInstalled OptionsEmulationError LogToner GaugeInterfacesKIR Test pattern ON1357824610119
