Chapter 1 Using the Operator Panel1-4This section explains how to use the menu selection system. The MENU key on the operator panel allows you to use the menu toset or change the printer environment such as the number of copies to print, emulation, etc., to your specific needs. Settings canbe made when Ready is indicated on the printer message display.The printer obeys the most recently received printer settings sent from the application software, or from the printer driver, whichtake priority over operator panel settings.Entering Mode Selection MenuPress the MENU key when Ready is indicated on the printer message display.Mode selection menu is displayed.Selecting MenuThe mode selection menu is hierarchical. Press the orkey to display desired menu.•If the selected menu has sub-menu, > is displayed after themenu.Press the key to move to the sub-menu or key to goback.•> is displayed before the sub-menu.Indicates that this is sub-menuPress the key to move to the another sub-menu or keyto go back.•>> is displayd before the second sub-menu.Setting MenuSelect the desired menu and press the ENTER key to set orchange the configuration.Press the or key to display desired item and the ENTERkey to finalize the value or selections set.Cancelling Menu SelectionIf you press the MENU key when selecting menu, the messagedisplay returns to Ready.Menu Selection SystemReadyPAR A4 PLAINPrintMenu MapPrintStatus PagePaper Handling > >Cassette Size >Custom >>Unitmm>MP Tray SizeA4Paper Handling >>Cassette Size >A4>>UnitmmIndicates that there issub-menuIndicates that this is second sub-menuIndicates that there isanother sub-menu
