22 Installation11 Press the Select Function key to finish.Setting the LanguageYour OKIFAX 5050 comes with two languages in-stalled—English and Spanish, French or Portuguese, de-pending on where you bought your unit—which appearon the display and in reports. Follow the instructions be-low to switch languages.1 Press the Select Function key.2 Press the 9/User Program One Touch key. Thedisplay shows 1:FUNC. PROGRAMMING.3 Press the Yes ß key. The display showsFUNCTION NO. [ ]ENTER 01-23.4 Using the numeric keypad, enter 15. The display showsUSER LANGUAGE.5 Press the No © key to switch to the other installedlanguage.6 To accept the language change, press the Yes ß key.7 Press the Select Function key to finish.6 Press the Start key to save your entry.7 Enter your Sender ID. This is a descriptive title up to 32characters long. Refer to the instructions below.To Do This UseEnter numbers Numeric keypad (press once)Enter spaces 14/Space One Touch keyEnter hyphens Hyphen keyEnter alphabet characters Locate the character you want on thenumeric keypad. Press that key repeatedlyuntil the character appears on the displayEnter a unique character Press the 0/Unique key repeatedly untilthe character you want appears on thedisplay. The following characters areavailable: ! # & ‘ ( ) * + , - . / : ; = ? · ä ßñ ö ü Æ Å Ø æ å øEnter two successive Press the No © key to move to theletters/numbers using next characterthe same keyMove the cursor to Yes ß and No © keysmake corrections8 Press the Start key to save your entry. The display showsNO= BACK NO.>.9 After the display clears, use the numeric keypad to enterthe telephone number for call back messages. Enter up to20 characters.Tip: Use the 14/Space One Touch key to enter spaces.10 Press the Start key to save your entry.Of5050hw.pm6 4/15/98, 9:31 AM22