Faxing: Basic Operations 33When loading multiple-page documents, do not load pa-per thinner than 0.003" (0.08 mm) or thicker than 0.005"(0.13 mm). For single-page documents, do not load paperthinner than 0.002" (0.06 mm) or thicker than 0.006" (0.15mm).Loading DocumentsTo prevent paper jams and problems during operation,stack your documents neatly, aligning their edges, beforeloading. Do not load documents of different sizes at thesame time.Tip: You can load and prepare to transmit a documentwhile your OKIFAX is still sending or receiving anothermessage, as long as the document feeder is clear. To dothis, load the document, select your location and pressthe Start key. Your document will be sent as a prioritywhen the current communication ends.1 Adjust the document guides to the width of the paper youare using.2 Stack your documents neatly, then insert them face downinto the document feeder. Readjust the document guidesfor a snug fit.3 Your OKIFAX will grip the documents and pull thebottom page into the machine.4 To obtain the best possible quality for the type of docu-ment you are scanning or faxing, use the Yes ß key to setthe resolution of your document. For most normaldocuments, the default STD setting works well.Document Type Resolution Resolutionto Use of ScanNormal office documents STD (Standard) 200 X 100 dpiDocuments with small FINE or EX. FINE FINE: 200 X 200 dpitype or other fine details EX.FINE: 200 X 400dpiDocuments with photos PHOTO 200 X 200 dpior many shades of grayOf5050hw.pm6 4/15/98, 9:32 AM33