Oki OKIFAX 5050 Handbook

Contents

Faxing: Dial Directories 313 On the numeric keypad, press the # key. The displayshows GROUP SETTING.4 Using the numeric keypad, enter the two-digit groupnumber you want to program. You can use numbersfrom 01 to 10.5 The display shows the number of your current group andSELECT LOC.(S).6 You can now add a location to your group (or delete alocation from it). Refer to the instructions below.To Do This UseAdd a One Touch Press the One Touch key.location Press Yes ß to add it to the group.Add an Auto Dial Press Auto Dial. Enter the 2-digit Auto locationDial number. Press Yes ß to add it tothe group.Delete a previously Press the One Touch key. Press No © addedOne Touch to delete it from the group.locationDelete an Auto Dial Press the Auto Dial key. Enter the 2-digitlocation Auto Dial number. Press No © to deleteit from the group.Search for a location Press the Search key continuously until by nameto add or delete the location you want appears. PressYes ß to add it to the group.Press No © to delete it.7 After you have completed your selection by pressing Yes ßor No ©, the display shows SELECT LOC. again. Continueto add or delete locations from your group. Each group cancontain up to a maximum of all of the One Touch and AutoDial locations available on your OKIFAX.8 When you are finished programming your group, press theNo © key. The display shows LOCATION PROGRAM-MING.9 To program another group, go back to Step 3.If you are finished, press the Select Function key.Of5050hw.pm6 4/15/98, 9:32 AM31