46 Faxing: Advanced OperationsRelay Group Numbers: These 2-digit numbers are the num-bers of groups of locations programmed into the relaykey station.Relay Key StationThe relay key station is the Okidata fax-capable unitwhich receives the original fax message and then auto-matically relays or broadcasts the message to other re-mote fax machines.For this feature to be available, the relay key stationmust be an OKIFAX 2600.Relay Broadcast ReportAfter the relay broadcast is completed, it is possible forthe relay key station to send a fax back to yourOKIFAX confirming the success of the relay broadcast.For this function to work, your OKIFAX’s own tele-phone number must be programmed into Auto Dialnumber 64.Be sure to program the number in the format the relay keystation uses for dialing, including access digit, if any, etc.Initiating a Relay Broadcast1 Load your documents.2 Press the Select Function key.3 Press the 4/Relay Initiate TX One Touch key.a.) The first time you use this feature, the displayshows:RELAY PASSWORDENTER [ ]- Using the numeric keypad, enter the 4-digit relaypassword.b.) If you have already used this feature, the displayshows:RELAY PASSWORD [XXXX]where XXXX is the last password you used.- If the password is correct, go to step 4.- If you want to use a different password, press the No ©key, then use the numeric keypad to enter the password forthe relay key station you want to use.4 Press the Yes ß key.a.) The first time you use this feature, the display reads:REMOTE LIST NO. [ ]ENTER 01-99- Using the numerical keypad, enter the 2-digit relay groupnumber for the group you want to fax to.b.) If you have already used this feature, the display shows:REMOTE LIST NO. [XX]where XX is the last list number you entered.- If the list number is correct, go to step 5.- If you want to fax to a different list, press the No ©key. Then use the numeric keypad to enter the numberof the list you want to use.Of5050hw.pm6 4/15/98, 9:32 AM46