Oki OKIFAX 5050 Handbook

Contents

Faxing: Advanced Operations 4110 Select a location. Refer to the following instructions.To Select Using Do ThisA One Touch key Press the One Touch key.An Auto Dial number Press the Auto Dial key, then enter thetwo-digit Auto Dial number on thenumeric keypad.A number dialed on Dial as you would on a normalthe numeric keypad telephone.11 Press the Start key. Your OKIFAX begins waiting for thetime and date you have set before feeding the documentand sending the fax.Sending a Delayed Fax From Memory1 Load your documents.2 Press the Select Function key.3 Press the 1/Delayed TX One Touch key. The displayshows DELAYED TX and today’s date.4 If the transmission is to occur on the same day, skip tostep 6. Otherwise, press the No © key. The display showsPRG. START DATE 0-9.5 Using the numeric keypad, enter the date you wish thetransmission to begin—up to three days in advance.6 Press the Yes ß key. The display shows PRG. STARTTIME 0-9.7 Using the numeric keypad, enter the time you wishthe transmission to begin, in 24-hour format—8:00 AMis 08:00; 8:00 PM is 20:00.8 Press the Yes ß key. The display shows FEEDER TX.9 Press the No © key.10 Select a location. Refer to the instructions below.To Select Using Do ThisA One Touch key Press the One Touch key.An Auto Dial number Press the Auto Dial key, then enter thetwo-digit Auto Dial number on thenumeric keypad.A number dialed on Dial as you would on a normal telephone.the numeric keypadA group Using the numeric keypad, press the #key, then enter the number of the groupyou want to use.11 Press the Yes ß key to confirm your selection. Thedisplay shows SELECT LOCATION(S).12 Repeat Steps 11 and 12 as often as necessary tocontinue selecting locations.13 When you are finished selecting locations, press theNo © key at the SELECT LOCATION(S) message.14 If you have selected multiple locations, your OKIFAXasks if you want to confirm your selections with aprinted report before proceeding. If you do, press theOf5050hw.pm6 4/15/98, 9:32 AM41