MATERIAL SAFETY DATA SHEETMATERIAL SAFETY DATA SHEETMATERIAL SAFETY DATA SHEETMATERIAL SAFETY DATA SHEETMATERIAL SAFETY DATA SHEETOL "e" Series TonerMSDS # 58093101For more information, contact Okidata at:532 Fellowship RoadMount Laurel, NJ 08054Emergency Information: 1-800-OKIDATAEmergency First Aid ProceduresEmergency ProcedureToner swallowed Dilute by giving two glasses of(ingested). water and induce vomiting byadministering Syrup of Ipecac(follow manufacturer’s instructions). Seek medical attention.NEVER give anything by mouthor attempt to induce vomitingin a person who is unconscious.Toner inhaled. Remove person to fresh air.Seek medical attention.Toner gets in Flush eyes with large quantitiesthe eyes. of cool water for 15 minutes,keeping the eyelids open withfingers. Seek medical attention.NoteNoteNoteNoteNote: Small amounts of toner on skin or clothing caneasily be removed with soap and cold water. Hot watermakes toner harder to remove.Hazardous IngredientsStyrene-Butyl Acrylate Copolymer (91% by weight)CAS# 25767-47-9OSHA TWA 15 mg/m 3 for total dustACGIH TLV 10 mg/m 3 for total dustCarbon Black (5-7% by weight)CAS# 1333-86-4OSHA TWA 3.5 mg/m 3ACGIH TLV 3.5 mg/m3Polypropylene (less than 3% by weight)CAS# 9003-07-0OSHA TWA 15 mg/m 3 for total dustACGIH TLV 10 mg/m 3 for total dustAmorphous Fumed Silica (less than 1% by weight)CAS# 67762-90-7OSHA PEL 15.0 mg/m 3 for total dustACGIH TLV 10.0 mg/m3 for total dustNoteNoteNoteNoteNote::::: This product is not regulated under Section 313 ofSARA, Title III.Physical DataMelting Point: 110°C (230°F)Boiling Point: Not applicableVapor Pressure: Not applicableOf5050hw.pm6 4/15/98, 9:45 AM84