Oki OKIFAX 5300 Plus Handbook

Also see for OF5300Plus: Quick start

Contents

24 InstallationTo Do This UseEnter numbers Numeric keypad (press once)Enter spaces 14/Space One Touch keyEnter hyphens Hyphen keyEnter alphabet characters Locate the character you want on thenumeric keypad. Press that key repeatedlyuntil the character appears on the displayEnter a unique character Press the 0/Unique key repeatedly untilthe character you want appears on thedisplay. The following characters areavailable: ! # & ‘ ( ) * + , - . / : ; = ? · ä ßñ ö ü Æ Å Ø æ å øEnter two successive Press the No © key to move to theletters/numbers using next characterthe same keyMove the cursor to Yes ß and No © keysmake corrections8 Press the Start key to save your entry. The displayshows NO=.9 After the display clears, use the numeric keypad toenter the telephone number for call back messages.Enter up to 20 characters.Tip: Use the 14/Space One Touch key to enter spaces.10 Press the Start key to save your entry.11 Press the Select Function key to finish.To program your Fax ID:1 Press the Select Function key.2 Press the 9/User Program One Touch key. Thedisplay shows 1:FUNC. PROGRAMMING.3 On the numeric keypad, press 4. The display shows4:SYSTEM DATA PRG.4 Press the Yes ß key. The display shows NO=CSI>, ID=.5 After the display clears, enter the full telephonenumber of your OKIFAX using the numerickeypad.Note: use the Hyphen key to enter a “+” character forinternational numbers, and use the Space One Touchkey to enter spaces.6 Press the Start key to save your entry.7 Enter your Sender ID. This is a descriptive title up to32 characters long. Refer to the instructions below.