Handbook | 6326 RESTRICT ACCESS: Select whether or not you wantrestricted access. Turning on this function renders yourrestricted ID registration active. Available settings are onand off.27 WIDTH REDUCTION: Turning this function on enablesyou to print received data that exceeds the printable areaof the page by slightly reducing the received data.Available settings are on and off.28 ONE TOUCH PARAM: This function allows you tomake changes to the communications settings for aspecific One Touch key, without changing the normalcommunication settings used by your MFP. Forinstructions on changing One Touch Parameters settingsfor a One Touch key, see “Programming Your One TouchDirectory.”Changing Your User Function Settings1 Press the Select Function key.2 Press the 9/User Program One Touch key. The displayshows 1:FUNC. PROGRAMMING.3 Press the Yes ß key. The display shows FUNCTION NO. [ ].4 Using the numeric keypad, enter the 2-digit number ofthe function you want to change. This display shows thename of the selected function.5 Repeatedly press the No © key until the setting youwant appears in the display.! If you are changing your MFP’s TX MODE DEFAULTsettings, the new settings appear on the LEDs above theTransmit Resolution/Yes § and the Type of Original/No© keys6 Press the Yes ß key to confirm your selection. The nameof the next function setting appears in the display.7 Press the Select Function key to finish.
