SPECIAL MODES5-26Card shotWhen copying a card, this function allows you to combine the front and back sides on a single sheet of paper.This function is convenient for making copies for certification purposes and helps save paper.● Copying is only possible on standard size paper.● A copy ratio cannot be selected when using thisfunction.● The image cannot be rotated when using thisfunction.1 Touch the [PAPER SELECT] key and thenselect the desired paper size.The selected paper sizekey is highlighted andthe paper selectionscreen closes.2 Touch the [CARD SHOT] key in the specialmodes screen (2nd screen).The CARD SHOTsetting screen willappear. A card shoticon ( , etc.) will alsoappear in the upper leftcorner of the screen toindicate that thefunction is turned on.3 Enter the X dimension (width) and Ydimension (length) of the original with thekeys.●X (width) is initially selected. Enter X and thentouch the Y ( ) key to enter Y.●To return the X and Y values to the initialsettings configured in the key operatorprograms, touch the [SIZE RESET] key.("CARD SHOT SETTINGS" on page 15 of thekey operator's guide).●To have the images enlarged or reduced by asuitable ratio based on the entered originalsize so that the front and back sides fit into theselected paper size, touch the [FIT TO PAGE]key.OriginalExample:PortraitA4 (8-1/2" x 11") sizeExample:LandscapeA4 (8-1/2" x 11") sizeCopyBack ofcardFront ofcardCARD CARDCARDNOTEIf paper of the desired size is not loaded in any tray,load paper of the required size in a paper tray or thebypass tray. (See "Setting the paper type and papersize" on page 2-5.)To display the special modes screen...See "General procedure for using specialfunctions" on page 5-2.READY TO SCAN FOR COPY.A4PLAIN1. A42. B43. B44. A4PLAINPLAINPLAINPLAINTRANSPARENCYINSERTS MULTI SHOTMIRRORIMAGECARD SHOTSIZE RESETCANCEL OKFIT TOPAGE
