Olivetti d-Copia 3501 Operation Manual

Also see for d-Copia 3501: Service manual

Contents

Olivetti d-Copia 3501 Operation Manual Manual pdf 68 page image

FINISHER3-12Misfeed in the finisherWhen a misfeed occurs in the finisher, remove the misfed paper following the procedure below.1 Remove the misfed paper from the outputarea.Be careful not to tear themisfed paper duringremoval.2 Open the finisher top cover.Move the tab in thedirection of the arrow asshown in the illustrationto open the top cover.3 Remove the misfed paper.Be careful not to tear themisfed paper duringremoval.After removing thepaper, press down onthe top cover to close it.4 Open the finisher compiler.Release the latch toopen the finishercompiler.5 Raise the paper guide and remove themisfed paper.Be careful not to tear themisfed paper duringremoval.6 Close the finisher compiler.Top coverPaperguide