SAVING A DOCUMENT IMAGE FILE7-10Scan SaveScan save is used to save a scanned document image in the main folder or the custom folder without copying or transmitting it.1 Press the [DOCUMENT FILING] key on theoperation panel.2 Touch the [SCAN TO HDD] key.3 Touch the [SPECIAL MODES] key.Select any specialfunctions that you wishto use (otherwise skipthis step).When the [SPECIALMODES] key is touched,the special modesselection screen appears. (See "Using specialfunctions for scan save." on page 7-12.)4 Touch the [FILE INFORMATION] key.5 The screens for selecting the user name, filename, folder, and attribute appear. Configure thesettings as explained in step 3 to step 15 onpages 7-7 to 7-8. When step 15 is completed, youwill return to the main screen of document filing.6 Perform any of the following steps 7 to 16as needed. When finished, go to step 17 onpage 7-11.OTo set the original size, perform steps 7 to 10.OTo set the resolution, perform steps 11 to 13on page 7-11 .OTo select the exposure, perform steps 14 to16 on page 7-11.OIf you no not wish to select any of the abovesettings, go to step 17 on page 7-11.7 Touch the [ORIGINAL] key.8 To set the original size, see "Manuallysetting the scanning size" on page 4-5.9 If the original is two-sided, touch the [2-SIDED BOOKLET] key or the [2-SIDEDTABLET] key depending on where thepages are bound.10 Touch the [OK] key.You will return to thescreen of step 7.NOTEFor explanations of the special functions, see page7-12 and chapter 5.SCAN TO HDDFILE STORESPECIAL MODESFILEINFORMATIONFILEINFORMATIONSPECIAL MODESSCAN TO HDD FILE FOLDERQUICK FILEFOLDERFILE RETRIEVEFILE STORENOTEIf the original pages are bound at the side, thedocument is a "booklet". If the original pages arebound at the top, the document is a "tablet".ORIGINALRESOLUTIONAUTO300x300dpi2-SIDEDBOOKLET2-SIDEDTABLETSCAN SIZE STORE SIZ100%AUTO AUTOOKSTORE SIZEAUTOIDED
