NORMAL COPYING4-114Copying from the document glassWhen copying originals which cannot be fed from the automatic document feeder such as thick originals, open thedocument cover and copy the originals from the document glass.Q 1-sided copies of 1-sided originals1 Place the original on the document glass.(pages 4-3 to 4-6)OAlign the corner of the original with the tip of thearrow mark on the document glass scale.OPlace the original in the appropriate position for itssize as shown above.2 Ensure that the 1-sided to 1-sided copymode is selected.The one-sided to one-sided mode is selectedwhen no icon for a two-sided mode appears inthe dashed area on thedisplay. If an iconappears, perform steps3 to 5 on page 4-7 and then go to step 3.3 Ensure that paper of the same size as theoriginal is automatically selected*.The selected tray will behighlighted or themessage "LOAD xxxxxxPAPER." will appear. Ifthe message appears,load paper in a papertray with paper of therequired size.Even if the message above is displayed, copyingcan be performed onto the currently selectedpaper.* The following requirements must be satisfied.Originals of a standard size (A3, B4, A4, A4R, B5,B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R or 5-1/2" x 8-1/2"R)) are set and theauto paper select function is enabled.If originals of a size otherthan the sizes above areto be copied, manuallyselect the desired papersize by touching the[PAPER SELECT] keyand then touching thedesired paper size selection key.The selected key will be highlighted and the paperselection screen will close. To close the paperselection screen without making a selection, touchthe [PAPER SELECT] key.Original CopyOriginal scalemarkOriginal scalemarkA5 or5½ x 8½A4 or 8½x11 A3 or 11x17B4 or8½x14A4R or 8½x11RORIGINALB4A4A4A4A4A4RAUTOAUTO100%A4PAPER SELECTCOPY RATIOEXPOSUREREADY TO SCAN FOR COPY.A4PLAIN1. A42. A33. A34. A4PLAINPLAINPLAINPLAIN
