7-26ENTERING CHARACTERSTo enter or edit characters in setting screens such as auto dial key programming screens, follow the steps below.Characters that can be entered are alphabetical characters, special characters, numbers, and symbols.Q Entering alphabetical characters(Example: Olivetti äÄ)1 Touch the [S] key.To switch between upper case and lower case,touch the [ABC abc] key. When ABC ishighlighted, upper case letters are entered.2 Touch the [ABC abc] key.3 Touch the [h] key, [a] key, [r] key, and [p]key.If you make a mistake, touch the key to movethe cursor ( ) back one space and then enter thecorrect character. You can also press the [AB/ab12#$%] key during entry to enter a number orsymbol.4 Touch the [SPACE] key.The cursor ( ) moves forward and a space isentered.5 Touch the [ ÃÄÂ/ãäâ] key.6 Touch the [ä] key.To switch between upper case and lower case,touch the [ÃÄ ãäâ] key. When ãäâ ishighlighted, lower case letters are entered.7 Touch the [ÃÄ ãäâ] key.8 Touch the [Ä] key.You can press the [ABC/abc] key during entry toreturn to alphabetical character entry. You canalso enter numbers and symbols.9 When finished, touch the [OK] key.You will exit the character entry screen and returnto the programming screen. If you touch the[CANCEL] key, you will return to the programmingscreen without storing the entered characters.Characters cannot beentered beyond the " " mark.SSharOlivettiOlivettiOlivettiOlivetti ä Olivetti ä Olivetti äÄ
