Manipulating Clips with Thumbnails: Thumbnail Manipulations OverviewPress the THUMBNAIL button to display the thumbnailscreen on the LCD monitor. Pressing the THUMBNAILbutton again returns the display to the regular display. Whenswitching is done from the regular screen display to thethumbnail screen display, all the clips will be displayed onthe thumbnail screen.Pressing the MENU button allows you to navigate thethumbnail menu.When the TCG switch is set to [SET] to set the time code anduser bits or when the camera menu is open, the THUMBNAILbutton does not work.Display ModeThe type of the thumbnail indicated on the display andthe types of the other information screens are indicated.Display all clips.Clips in the same format as the system format(SYSTEM MODE item, REC FORMAT item,AUDIO SMPL RES item) are shown.[Selecting a recording signal and method](page 47)The clips selected with the SET button areshown.Display clips with shot marks.Display clips with text memo data.Display clips in the specified P2 card.(n: 1 or 2, which indicates Slots 1 or 2.)Indicated when the camera-recorder isupdating the screen or reading data. Whenthe screen is being updated, the rotating icon[Switching the Thumbnail Display] (page 122)Slot numbers and HDD statusThis section indicates on which P2 card the pointed clipis recorded. The number of the slot that contains theappropriate P2 card is indicated in yellow. If the clip isrecorded on more than one P2 card, then the numbersof all slots that contain the appropriate cards areindicated. The numbers of the other slots are shown inwhite if they contain P2 cards.When the following P2 card is inserted, the slot numberis displayed with a pink frame.RUN DOWN CARD(A P2 card on which the maximum number ofoverwrites has been exceeded.)DIR ENTRY NG CARD(A P2 card on which the directory structure is notsupported.)The USB HDD section is indicated as follows:Other than the USB HOST mode: grayNot connected in USB HOST mode: grayHDD recognized and usable in USB HOST mode:whiteHDD recognized and thumbnails shown in USBHOST mode: yellowHDD recognized and not usable in USB HOST: redTime DisplayYou can set this to display the time code at the start ofclip recording (TC), the user bits at the start of cliprecording (UB), the shooting time (TIME), the shootingdate (DATE), the shooting time date and time (DATETIME), or the user clip name (USER CLIP NAME).Recording modeThe recording mode for the clip on which the pointer islocated is indicated.System formatThe format for the clip on which the pointer is located isindicated.DurationThe duration of the clip on which the pointer is located isindicated.USB HOST mode indicatorIndicated when the mode has been switched to USBHOST.Thumbnail ScreenThumbnail screenUSO RESTRITO