Menu: Menu Description TablesThe items indicated by are the setting items for PAINTMENU SW( ) R/W in the screen.The items without are the setting items for PAINT MENULEVEL R/W.[SD CARD R/W SELECT] (page 193)The SKIN TONE DTL item operates separately from thedetails set in the LOW SETTING, MID SETTING, HIGHSETTING, ADDITION DTL, and CAMERA SETTING items.SKIN TONE DTLItems/Data Saved RemarksABFor selecting the skin color table forenabling the skin tone detail.The skin color table is provided in theDETECT TABLE item.By enabling the skin tone detail, it ispossible to shoot human skin moreaccurately.S C U F RFor the setting to display the zebrapattern in the skin tone area displayed inthe viewfinder screen.The zebra pattern is displayed when thisitem is turned ON and the DTL> screen is opened.The zebra pattern indicates the areawhich is selected in the SKIN TONE DTLitem.S C U F RFor setting to include the skin tone zebrain the SDI OUT signal.The zebra pattern is displayed when thisitem is turned ON and the DTL> screen is opened.The zebra pattern indicates the areawhich is selected in the SKIN TONE DTLitem.S C U F RFor setting to include the skin tone zebrain the MON OUT signal.The zebra pattern is displayed when thisitem is turned ON and the DTL> screen is opened.The zebra pattern indicates the areawhich is selected in the SKIN TONE DTLitem.S C U F RFor selecting the skin color table forsubjects to which the skin tone tableapplies.S C U F RFor fetching the color information of A orB, which is selected in the DETECTTABLE item, near the center marker.When this function is executed, data fromI CENTER to Q PHASE are fetchedautomatically.The fetched data will be the table data ofA or B, which is selected in the DETECTTABLE item.It is impossible to obtain color informationof both A and B at the same time. ::For setting the effect level of the skin tonedetail.S C U F R::For setting the maximum value ofbrightness for enabling the skin tone.S C U F R::For setting the minimum value ofbrightness for enabling the skin tone.S C U F R::For setting the center position on the Iaxis (for setting an area that enables skintone.)S C U F R::For setting the area width for enabling theskin tone on the I-axis of which the centeris the I CENTER.S C U F R::For setting the area width for enabling theskin tone on the Q-axis of which thecenter is the I CENTER.S C U F R::For setting phases of the area forenabling skin tone as setting the standardto the Q-axis.S C U F RKNEE/LEVELItems/Data Saved Remarks::Set the master pedestal.S C U F RSet the mode when the AUTO KNEEswitch is OFF. The KNEE MASTERPOINT/SLOPE set value is enabled whenthis setting is ON.S C U F R::For setting the knee point position inincrements of 0.5% steps.S C U F R::For setting the inclination of the knee.S C U F RSet the WHITE CLIP feature to ON orOFF. The WHITE CLIP LVL set value isenabled when this setting is ON.S C U F R:Set WHITE CLIP LEVEL.S C U F RItems/Data Saved Remarks direction+ direction= SKIN TONE AREAUSO RESTRITO
