Manipulating Clips with Thumbnails: Thumbnail Manipulations OverviewPress the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.Use the cursor buttons to move the pointerover the clip you want to delete andPress the THUMBNAIL MENU button andselect OPERATION DELETE from thethumbnail menu.The following screen appears. Use the cursorbuttons and the SET button to select YES.The clip is deleted. All selected clips (in blue-greenframes) are deleted by this operation.To interrupt deleting, press the SHIFT and EXIT buttons or theSET button to cancel the operation. Partially deleted clipscannot be restored by canceling.Restores clips that are defective as a result of suddenpowering-down during recording, or removal of the P2 cardbeing accessed.Only those clips with yellow corrupt clip markers can berestored. Delete the clips with red corrupt clip markers. If theclip cannot be deleted, format the P2 card.During restoration of the clips, however, the defective-clipindicator may change from yellow to red, resulting in inabilityto restore the clips.Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.Use the cursor buttons to move the pointerover the clip you want to restore (defectiveclips are indicated by corrupt clip marks) andpPress the THUMBNAIL MENU button, andselect OPERATION REPAIR CLIP from thethumbnail menu.When a confirmation screen asks you to confirm thatyou want to repair the clip, use a cursor button and theSET button to select YES if you want to restore the clip.Deleting Clips Restoring ClipsUSO RESTRITO
