Adjustments and Settings for Recording Setting Time DataThe camera ID is specified through the screen. The ID can include up to 10 alphanumericcharacters, symbols, and/or spaces.When the settings menu is displayed, outputting color barsignals does not indicate the camera ID.Go to the screen from the CAMOPERATION page and turn the JOG dialbutton to move the cursor to options [ID1:] -[ID3:].Press the JOG dial button.The cursor moves to the ID entry area, allowing you toenter an ID.Turn the JOG dial button until a desiredcharacter appears.The characters that appear are switched in thefollowing order:Space:Alphabetical characters: A to ZNumerals: 0 to 9Symbols: ', >, <, /, -Press the JOG dial button to accept a desiredcharacter.Turn the JOG dial button to move cursor to thenext digit (clockwise), and repeat Steps - toset characters.To change an input character, turn the JOG dialbutton to move the arrow (cursor) to the appropriatecharacter and carry out steps and .When all the characters are set, turn the JOG dialbutton to move the cursor to [:].Pressing the JOG dial button brings the cursor backto the options [ID1:] - [ID3:].To exit the menu, press the MENU button.When the menu option CAMERA ID is set to BAR, thecamera ID is recorded together with color bar signals.The menu item CAMERA ID is found in the INDICATOR> screen on the VF page.The ID POSITION menu option can be used to select aposition where the camera ID is superimposed on thecolor bar. The menu item ID POSITION is found in the screen on the VF page.When the TIME/DATE menu option is set to ON, thecamera ID along with the data and time information aresuperimposed on the color bar. The menu item TIME/DATE is found in the screen on the VFpage.When the TC ON COLOR BAR is turned ON, the timecode is displayed when the color bar is output, but thetime code is not recorded. The menu item TC ONCOLOR BAR is found in the screen onthe VF page.Providing an ID to the CameraUSO RESTRITO