Menu: Menu Description TablesThe screen is displayed when SYSTEMMODE is set to 1080-59.94i, 1080-50i (HD mode).DOWNCON SETTINGItems/Data Saved RemarksFor setting the mode of the downconverter output signals.Part of the down converter output imageat the top or bottom may be disruptedwhen LT-BOX is selected in this menuoption, but this is not a malfunction. C U F RFor setting the detail function for thedown converter output signals ON/OFF.The down converter output signalscontain detailed components that are setduring HD signal processing. In thissetting, these signals overlap the detailedcomponents dedicated to the downconverter outputs.Even if this setting is turned off, it isimpossible to turn off the detailedcomponents set during HD signalprocessing. C U F RFor setting the horizontal detail correctionlevel for the down converter outputsignals. C U F RFor setting the vertical detail correctionlevel for the down converter outputsignals. C U F RFor setting the noise elimination level ofthe details. C U F RFor selecting the horizontal detailfrequencies.2.5 MHz 4 MHz3 MHz 4.5 MHz3.5 MHz C U F RFor setting the 2-D low path filter reducingcross colors.Cross colors are reduced.Cross colors are not reduced. C U F RFor setting the setup level for the downconverter output signals.(Only for 1080-59.94i)When the system frequency is set to 50Hz, the setup level will be 0%. C U F RLCD MONITORItems/Data Saved Remarks::Adjust the LCD monitor brightness. C U F ::Adjust the LCD monitor chroma level. C U F ::Adjust the LCD monitor contrast. C U F Turn the backlight off, or adjust itsbrightness.OFF: turns the backlight OFF.LOW: turns the backlight to lowerthan NORMAL.Mode normally usedThis is brighter thanNORMAL C U F Select whether or not to change the LCDmonitor to mirror image.NORMAL: Do not change to mirrorimage.MIRROR: Change to mirror image. C U F USO RESTRITO
