Panasonic AJ-SD755 Operating Instructions Manual

31Setup menus1 Press the MENU button.2 Press the REW button or FF button while holdingdown the DIAG button to select the USER1 file.4 Turn the search dial while holding down the searchbutton to select the user file in which the contentsof USER1 are to be saved.Those user files whichhave been set to the lock mode do not appear onthe display. If all the user files have been set to thelock mode, the “LOCKED” display appears, andthe contents of USER1 cannot be saved into any ofthe user files.3 Turn the search dial to move the cursor (2) on themenu screen to No. A01 (SAVE).Saving user filesAutomatically recalling a user filewhen turning on the powerIf the user file to be loaded is selected in advanceusing setup menu No. A02 (P.ON LOAD), the file willbe automatically loaded into USER1 when the poweris turned on.SETUP-MENU MENU<USER1> NO.A00-0000804 BLANK LINE BLANKA00 LOAD USER22A01 SAVE USER2A02 P.ON LOAD OFFEND5 Press the SET button.The following message appears on the menuscreen and counter display.SETUP-MENU SAVEUSER1 n USER2 OK?YES<PLAY>/NO<STOP>Menu screenCounter displayThe number of the user file selected in step 4 isdisplayed at .6 Press the PLAY button.The settings of USER1 are saved in the user fileselected in step 4 and stored in the memory. If theSTOP button is pressed instead, the settings arenot changed, and the USER1 menu displayappears.7 Turn the search dial to move the cursor (2) on themenu screen to a number other than No. A00(LOAD) or No. A01 (SAVE).8 Press the SET button. The USER1 settings arestored in the memory.If the USER1 settings are not to be stored in thememory, do not press the SET button but press theMENU button instead.