52Setup menusThe underlined items indicates the initial setting.USER menu No./Item Description803TELETEXTDET00REC LINE1:12REC LINE13Sub-screenFor selecting the method used to detect thelines in which the teletext signals are to berecorded.0000 OFF :The teletext signals are not recorded.0001 AUTO :The teletext signals are automatically detectedand recorded.0002 MANU :The lines in which the teletext signals are to berecorded are selected and set.OThe number of lines in which the teletextsignals can be recorded depends on thenumber of recording lines which was enteredas the setup menu No. 800 (ADD LINE)setting. [See “Number of lines which can be setfor teletext.”]OWhen setting “MANU” is selected and theSTOP button is pressed, operation transfers tothe sub-screen, and the number of recordinglines can be selected.To return from the sub-screen, press the STOPbutton again.OWhen the input signal is a non-standard signalor N-STD has been selected for the setupmenu No. 303 (STD/NONSTD) setting, teletextsignals will not be played back correctly in EEmode.For selecting the lines in which the teletextsignals are to be recorded.0000 OFF0001 10&2730002 11&2740003 12&2750004 13&2760005 14&2770006 15&2780007 16&2790008 17&2800009 18&2810010 19&2820011 20&2830012 21&2840013 22No./Item Description804BLANK LINE00LINE 10&273:11LINE 21&284Sub-screenThis turns the blanking ON or OFF in thevertical blanking period of the video outputsignals.0000 BLANK :Blanking is effected forcibly for all lines.0001 THRU :No blanking is effected for any of the lines.0002 MANU :Blanking ON or OFF is selected for each line.When setting “MANU” is selected and the STOPbutton is pressed, operation transfers to the sub-screen, and ON or OFF can be selected for eachline. To return from the sub-screen, press theSTOP button again.0000 BLANK : Blanking is forcibly effected.0001 THRU : No blanking is effected.Number of lines which can be set for TELETEXTThe number of lines differs, depending on whether ON or OFF hasbeen selected for the setup menu item No. 660 (UMID REC) setting.10 13OFF4 5YC4225 8YC41110 13Y1_B/W, Y1_BPF, C14 5Y2_B/W, Y2_BPF, C2No. 800: ADD LINEsetting valueNumber of lines which can be setUMID REC: ON UMID REC: OFF
