35Setup menusThe underlined items indicates the initial setting.USER menu No./Item Description015MONICONTROLThis sets whether the recorder is to beforcibly set to the EE mode and the player’splayback signals are to be output to themonitor by pressing the recorder’s PLAYERbutton when a monitor has been connectedonly to the recorder during deck-to-deckediting.0000 MANU :The recorder is not forcibly set to the EE mode.0001 AUTO :The recorder is forcibly set to the EE mode,and the player’s playback signals are output.017CHARA SIZEThis selects the size of the characters for thesuperimposed display output from the VIDEOOUT 3 or SDI OUT 3 (AJ-YA755G, optional)connector.0000 NORMAL : Standard size0001 LARGE : 4 times larger than the standardsizeWhen LARGE has been selected, only time datais displayed, regardless of the setup menuNo.008 (DISPLAY SEL) setting.010CHARA V-POSThis sets the position of the characters on thevertical plane for the time code and othersuper displays output to the VIDEO OUT 3/SDIOUT 3 (AJ-YA755G, optional) connector.0000 0: :0018 18: :0022 22OWhen setting this item, the DISPLAY SELstatus is output to VIDEO OUT 3/SDI OUT 3even if SUPER OFF has been set. However,when the menu is exited, operation complieswith the SUPER OFF/ON setting.OWhen the DISPLAY SEL setting causescharacters to extend beyond the edges of thescreen, the setting value is changed so that thecharacters are automatically displayed in aposition on the screen.011CHARA TYPEThis selects the display type for the superdisplay output to the VIDEO OUT 3/SDI OUT 3(AJ-YA755G, optional) connector as well asfor displays such as the setting menu, etc.0000 WHITE : White characters against a blackbackground.0001 W/OUT : White characters with a blackborder.No./Item Description009CHARA H-POSThis sets the position of the characters on thehorizontal plane for the time code and othersuper displays output to the VIDEO OUT 3/SDIOUT 3 (AJ-YA755G, optional) connector.0000 0: :0004 4: :0016 16When setting this item, the DISPLAY SEL statusis output to VIDEO OUT 3/SDI OUT 3 even ifSUPER OFF has been set. However, when themenu is exited, operation complies with theSUPER OFF/ON setting.Also, CHARA TYPE is output to VIDEO OUT3/SDI OUT 3 according to the status set in themenu.
