Panasonic AJ-SD755 Operating Instructions Manual

48Setup menusThe underlined items indicates the initial setting.USER menu

No./Item Description No./Item Description701CH1 IN LVThis selects the audio input (CH1) referencelevel switching.0000 4dB0001 0dB0002 –20dB702CH2 IN LVThis selects the audio input (CH2) referencelevel switching.0000 4dB0001 0dB0002 –20dB706CH1 OUT LVThis selects the audio output (CH1) referencelevel switching.0000 4dB0001 0dB0002 –20dB707CH2 OUT LVThis selects the audio output (CH2) referencelevel switching.0000 4dB0001 0dB0002 –20dB711MONIL OUTLVThis selects the audio monitor output (Lch)reference level switching.0000 4dB0001 0dB0002 –20dB712MONIR OUTLVThis selects the audio monitor output (Rch)reference level switching.0000 4dB0001 0dB0002 –20dB715CH1 IN SELThis selects the CH1 input when USER SEThas been selected by pressing the unit’sAUDIO input selector button.0000 ANA : Analog input.0001 DIGI : Digital input.716CH2 IN SELThis selects the CH2 input when USER SEThas been selected by pressing the unit’sAUDIO input selector button.0000 ANA : Analog input.0001 DIGI : Digital input.719DIGI IN SELThis selects the CH1 and CH2 digital inputwhen USER SET has been selected by pressingthe unit’s AUDIO input selector button.0000 AES : AES/EBU input0001 SIF : SDI inputWhen no optional board (AJ-YA755G) has beeninstalled, setup menu No. 719 is not displayed.713MONI OUTThis selects whether or not to couple thevolume level of the audio monitor output withthe volume control of the headphone jack.0000 UNITY :Volume is output at a fixed level, regardless ofthe position of the volume control.0001 VAR :Audio monitor output volume is coupled to thevolume control.721MONI CH SELThis selects the monitor output.0000 MANU :The output signal is as selected in MONITORSELECT buttons.0001 AUTO :PCM AUDIO output is selected within the–0.43 (–0.5)a to +1a speed range; CUE isautomatically selected for all other tapespeeds.The value for the DV/DVCAM tape is shown inparenthesis ( ).0002 PCM :The PCM AUDIO signal is output over the–10a to +10a range.This setup menu’s setting takes effect when CH1or CH2 has been selected by the L and RMONITOR SELECT buttons on the front panel. (IfCUE has been selected, the cue signal will beoutput at all the speeds regardless of the setupmenu’s setting.)722REC CH1This selects the input signal to be recordedon the audio CH1 track.0000 CH1 : Audio input CH1 signal.0001 CH2 : Audio input CH2 signal.0002 CH1+2 : Mixed audio input CH1 and CH2signal.723REC CH2This selects the input signal to be recordedon the audio CH2 track.0000 CH1 : Audio input CH1 signal.0001 CH2 : Audio input CH2 signal.0002 CH1+2 : Mixed audio input CH1 and CH2signal.726REC CUEThis selects the input signal recorded in CUE.0001 CH1 : Audio CH1 input0002 CH2 : Audio CH2 input0003 CH1+2 : Audio CH1 and CH2 MIX signal727PB FADEThis selects the processing method for theaudio edit points (IN point, OUT point) duringplayback.0000 AUTO : According to the status duringrecording.0001 CUT : Forced CUT0002 FADE : Forced FADE