Panasonic AJ-SD755 Operating Instructions Manual

57Video output signals and servo reference signalThis section explains how the output signals andservo reference signal are selected.External synchronization of videooutput signalsThe video output signals are output in synchronizationwith the REF VIDEO input signal or video input signal.As shown in the figure below, this signal is selected inaccordance with the setup menu settings, VTR modeand availability of the video input signal.Synchronization is determined as follows dependingon the availability of the REF VIDEO input signalwhen “BB”, “CB100” or “CB75” has been selected asthe setup menu No. 600 (INT SG) setting.O When the REF VIDEO input signal is available:Synchronization with the REF VIDEO input signalO When the REF VIDEO input signal is not available:Internal synchronizationStartWhat is thesetup menu No. 304 (SERVOREF) setting?EXTIs the unitin one of the editingmodes?YESHas the unitbeen set to the recordingmode?YESAUTOWhat is thesetup menu No. 601 (OUTVSYNC) setting?Is thevideo input signal available?N-VFYESVFNONOIs theREF VIDEO input signalavailable?Internal synchronization Synchronization with theREF VIDEO input signalSynchronization withthe video input signalYESNOIs theREF VIDEO input signalavailable?NONONON-STDIs thevideo input signal a compositesignal?YESNOWhat isthe setup menu No. 303(STD/NON-STD)setting?AUTONON-STD Is thevideo input signal a standardor non-standard signal?STDSTDYES