51No./Item Description802TELETEXTSELFor selecting the type of teletext signals to berecorded.0000 MOJI : MOJI system0001 NABTS : NABTS systemVITC signals are often mistakenly detected asteletext signals when the NABTS system hasbeen selected.If this happens, select MANU as the setting forsetup menu No. 803 (TELETEXT DET), thenselect the line for teletext signals.Setup menusThe underlined items indicates the initial setting.USER menu No./Item Description800ADD LINE00REC LINE1Sub-screenFor selecting the mode for recording signalson additional lines.0000 OFF : No signals are recorded onadditional lines.0001 YC422 : The 422 mode signals arerecorded on 1 line.0002 YC411 : The 411 mode signals arerecorded on 1 line.0003 Y1_B/W : Only the Y signal is recorded on1 line directly.0004 Y1_BPF : Only the Y signal is recorded on1 line after it has been separatedfrom the C signal.0005 C1 : Only the C signal is recorded on1 line.0006 Y2_B/W : Only the Y signal is recorded on2 lines directly.0007 Y2_BPF : Only the Y signal is recorded on2 lines after it has beenseparated from the C signal.0008 C2 : Only the C signal is recorded on2 lines.OWhen a setting from “0001 (YC422)” to “0008(C2)” is selected and the STOP button ispressed, operation transfers to the sub-screen,and the recording line or lines can be selected.To return from the sub-screen, press the STOPbutton again.For selecting the additional line where thesignals are to be recorded.0000 10L: :0012 22L0013 263L0014 273L: :0025 284L0026 525L01REC LINE2For selecting the additional line where thesignals are to be recorded.0000 10L: :0012 22L0013 263L0014 273L: :0016 275L: :0025 284L0026 525LThis menu item is not displayed when additionalline mode setting “1” through “5” has beenselected.
