Panasonic AU-EVA1E Operating Instructions Manual

Contents

– 124 –Chapter 5 Shooting — Convenient shooting functionsSetting the size of the frame.1 Select the size of the frame in the [OUTPUT SETTINGS] menu → [LCD MARKER] → [SAFETY AREA].Displaying frame markerA frame marker can be displayed.1 From the [OUTPUT SETTINGS] menu → [LCD MARKER] → [FRAME MARKER], select the angle of view.f The frame marker is not displayed when [OFF] is selected.Setting the display color1 From the [OUTPUT SETTINGS] menu → [LCD MARKER] → [FRAME COLOR], select the display color.@@ NOTEt The marker cannot be recorded.t When the enlarged display function and the focus square display of the focus assist function is enabled and while displaying the color bars, the markeris not displayed.t Displays/hides of the marker can be temporarily switched by pressing the USER button with [LCD MARKER] assigned.t The marker can be displayed in the output image from the terminal by setting in the [OUTPUT SETTINGS] menu → [SDI OUT] →[MARKER DISP] → [ON], and setting [SDI/HDMI MARKER]. Similarly, the marker can be displayed in the output image of the terminal bysetting the [OUTPUT SETTINGS] menu → [HDMI OUT] → [MARKER DISP] → [ON].One-push auto focus functionThe one-push auto focus function is a function to automatically adjust the focus.The focus area is 1/3 of the screen height and 1/4 of the width.1/4 or more of the screen width1/3 or more of the screenheightr Assign [ONE PUSH AF] to the USER buttonSet so enable/disable of the one-push auto focus function can be switched with an arbitrary USER button.1 Select the [SYSTEM SETTINGS] menu → [USER SWITCHES] → [USER1] to [USER9] → [ONE PUSH AF].f [ONE PUSH AF] is assigned to the button as a factory setting.r Using the one-push auto focus function1 Set the focus switch on the lens to AF.2 Press the USER button to which [ONE PUSH AF] is assigned.@@ NOTEt The one-push auto focus function operates only when a lens compatible with the auto focus is mounted.Focus assist functionThe focus assist function enables you to focus the target easily.The recording image on the LCD monitor can be displayed enlarged, or the focused area can be visually enhanced.It is also possible to make the focusing easier by changing the aperture of the iris to decrease the depth of field.The focus assist function is displayed only on the LCD monitor.Enlarged display functionCenter of the recording image is displayed enlarged to make it easier to focus.r Assigning [EXPAND] to the USER buttonSet so enable/disable of the enlarged display function can be switched with an arbitrary USER button.1 Select the [SYSTEM SETTINGS] menu → [USER SWITCHES] → [USER1] to [USER9] → [EXPAND].f [EXPAND] is assigned to the button as a factory setting.