Panasonic AU-EVA1E Operating Instructions Manual

Contents

– 74 –Chapter 4 Operation — Menu setting contents[CAMERA SETTINGS] menuSets the basic camera function.This menu cannot be set when the thumbnail screen is displayed.[FPS][VFR SW]Enables/disables the variable frame rate recording function.[ON] Enables the variable frame rate recording function. The arbitrary frame rate can be set in [VALUE] of [FPS]. Audio cannot berecorded when [FREQUENCY] and [FPS] are different.[OFF] Disables the variable frame rate recording function.(Factory setting: [OFF])[VALUE]Selects the arbitrary frame rate.(Factory setting: The value set in [FREQUENCY])[ADD]Newly registers the frame rate. The newly registered value can be selected in [VALUE] of [FPS].Maximum of 150 values can be registered. It cannot be registered when there are 150 registered already.[EDIT]The currently selected setting value can be edited. It will be saved after updating the setting value.[DELETE]Deletes the currently selected setting value.It cannot be deleted if there is only one registered setting value.[SHUTTER][SW]Enables/disables the shutter function.The items that can be set are as follows.f [ON], [OFF](Factory setting: [ON])[MODE]Sets the displaying method of the shutter speed.[sec] Displays in time.[deg] Displays in the shutter aperture angle.(Factory setting: [deg])[VALUE deg]Selects the aperture angle of the shutter when the display unit in [MODE] of [SHUTTER] is set to [deg].Following values are registered as the factory settings.f [HALF SHUTTER], [11.5d], [22.5d], [45.0d], [90.0d], [120.0d], [144.0d], [172.8d], [180.0d], [270.0d], [357.0d](Factory setting: [HALF SHUTTER])[ADD deg]Newly registers the aperture angle of the shutter to select when the display unit in [MODE] of [SHUTTER] is set to [deg]. The newly registered value canbe selected in [VALUE deg].Maximum of 12 values can be registered. It cannot be registered when there are 12 registered already.[EDIT deg]The currently selected setting value can be edited. It will be saved after updating the setting value.[DELETE deg]Deletes the currently selected setting value.It cannot be deleted if there is only one registered setting value.The items that can be selected are as follows.f [YES], [NO][VALUE sec]Selects the time when the display unit in [MODE] of [SHUTTER] is set to [sec].Following values are registered as the factory settings.f [HALF SHUTTER], [1/60.0], [1/100.0], [1/120.0], [1/250], [1/500], [1/1000], [1/2000](Factory setting: [HALF SHUTTER])