–59–Chapter 4 Operation—Displaying the HOME screenDisplaying the HOME screenStatus of the camera can be confirmed.1789101314151617181112234561[FPS]Displays the setting status of the variable frame rate recording function and the recording frame rate.2[COLOR]Displays the color setting of the video recorded to the main recorder.3[SHUTTER]Displays the shutter speed.[sec]:Displays in time.[deg]:Displays at shutter open angle.4[EI]Displays the EXPOSURE INDEX (gain).[ISO] and [dB] can be switched with the [CAMERA SETTINGS] menu→[EI]→[MODE].5[AUDIO]Displays the status of the audio input for audio channel 1 and the audio channel 2.[IN1]:The [IN2]:The [MIC]:An external microphone is selected as the audio input.[LINE]:An audio device is selected as the audio input.[INT(L)]:The built-in microphone is selected as the audio input.[INT(R)]:The built-in microphone is selected as the audio input.[48V]:The external microphone power supply is enabled.6[WB]Displays the color temperature (white balance).In case of the preset list acquired by the auto white balance, the color temperature is displayed with [A] at the beginning.[ATW]:Displays while the auto white balance is operating.[ATW LOCK]:Displays when the auto white balance is locked.7Number of recorded pixels/system frequencyDisplays the number of recording pixels and the system frequency.8Pre-recording status displayDisplays the re-recording status.:When the [REC SETTINGS] menu→[PRE REC]→[ON] is set and pre-recording is enabled(No display):When the [REC SETTINGS] menu→[PRE REC]→[OFF] is set, or when pre-recording is unable9Card slot 1/card slot 2 status displayIndicates the insertion status, current recording target, and remaining recordable capacity of the SD card.:When the SD card is inserted, and it is set as the recording target:When the SD card is inserted, but it is not set as the recording target[0min]…[999min]:Remaining recordable capacity (0 - 999 minutes, 999 minutes or more is displayed as [999min])[END]:When there is no remaining recordable capacity[WP]:When the write protect switch of the SD card is set to the LOCK side[!SDXC]:When the SDHC memory card is inserted, and the [SYSTEM SETTINGS] menu→[SYSTEM MODE]→[MAIN CODEC] is set to a file inMOV format (displayed in red)[ERR]:When a recording media that cannot be recorded is inserted (displayed in red)(No display):When the SD card is not inserted10Special recording function displayDisplays the setting and enable/disable status of the special recording function of each card slot.[RELAY]:When set to relay recording[SIMUL]:When set to simultaneous recording11Wireless LAN connection status displayDisplays the connection status of the wireless LAN.(No display):When the [NETWORK SETTINGS] menu→[NETWORK SEL]→[OFF] is set:When ROP is not connected:When ROP is connected
