Panasonic AU-EVA1E Operating Instructions Manual

Contents

– 95 –Chapter 4 Operation — Menu setting contents[SPOT METER UNIT]Sets the display unit for the spot meter.This is fixed to [%] when set to anything other than the [SYSTEM SETTINGS] menu → [COLOR SETTINGS] → [MAIN] → [V-Log].The items that can be set are as follows.f [STOP], [%](Factory setting: [STOP])[SPOT METER SIZE]Sets the size of area to detect with the spot meter display function.The items that can be set are as follows.f [S], [M], [L](Factory setting: [M])[LCD LEVEL GAUGE][LEVEL GAUGE]Displays/hides the level gauge.The items that can be set are as follows.f [ON], [OFF](Factory setting: [ON])[LEVEL GAUGE RESET]Sets the horizontal and vertical reference value set by [LEVEL GAUGE SET] in the USER button to the factory setting.The items that can be selected are as follows.f [YES], [NO][COLOR BARS][COLOR BARS TYPE]Sets the color bar to be used.[SMPTE] Uses the color bars in SMPTE standard.[FULL] Uses the full color bars.(Factory setting: [SMPTE])[TEST TONE]Sets if the audio test signal (tone signal of rating level 1 kHz) is output or not when the color bars are displayed.The reference level varies depending on the setting in the [AUDIO SETTINGS] menu → [AUDIO CH SETTINGS] → [HEAD ROOM].The items that can be set are as follows.f [ON], [OFF](Factory setting: [ON])[FILE] menuSaves and reads the setting data.For saving and loading target, refer to “Target items for scene file/setup file/initialization”.For details of saving and loading, refer to “Handling setting data”.[SCENE FILE][LOAD] Selects the scene file saved in the SD card and reads it into the camera.Can select if all of the scene files ([SCENE1] to [SCENE5]) are read, or individually read.[SAVE] The setting value of the current scene file ([SCENE1] to [SCENE5]) is overwritten to the file selected from the list of scenefiles saved in the SD card.[SAVE AS] The setting value of the current scene file ([SCENE1] to [SCENE5]) is saved to the SD card as a new scene file by enteringthe file name.[SETUP FILE][LOAD] Selects the setup file saved in the SD card and reads it into the camera.[SAVE] Overwrites the file selected in the list of the setup files saved in the SD memory card with the current setting value of thecamera.[SAVE AS] Saves the current setting value in the camera as a new setup file in the SD card by entering the file name.