Panasonic AU-EVA1E Operating Instructions Manual

Contents

– 156 –Chapter 8 Connecting to External Devices — Connecting the camera and the iPad/Android terminal6 If the [ENCRYPT KEY] is set, enter the password, and select [Enter].7 Check the network connection.Once connected, is displayed on the screen of the camera.@@ NOTEt ENCRYPTION in WEP is not supported.r Setting items in [NETWORK PROPERTY] when set to [INFRA(SELECT)][ENCRYPTION] [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE](Factory setting: [WPA-AES])[ENCRYPT KEY] WPA2 encryption key(Factory setting: [01234567890123456789abcdef])[DHCP] Setting the DHCP functionf [OFF]: Does not use the DHCP function.f [CLIENT]: Acquire from DHCP when connecting with [TYPE] set to [INFRA(SELECT)] or[INFRA(MANUAL)].f [SERVER]: When connecting by setting [TYPE] to [DIRECT], enable the DHCP server function of thecamera. (Cannot be selected.)(Factory setting: [SERVER])[IP ADDRESS] IP address of the camera(Factory setting: [192.168.0.1])[SUBNET MASK] Subnet mask(Factory setting: [255.255.255.0])When entering the wireless access point (SSID) manually1 Select the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [INFRA(MANUAL)].2 Set each item in the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] as necessary.f For details of setting, refer to “Setting items in [NETWORK PROPERTY] when set to [INFRA(MANUAL)]”.3 Select the [NETWORK SETTINGS] menu → [NETWORK SEL] → [WLAN].4 From the [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [SSID], enter the SSID of the wireless access point toconnect.5 Select SSID, and select [Enter].Setting is completed when the [ENCRYPT KEY] (encryption key, password) is not set.6 If the [ENCRYPT KEY] is set, enter the password, and select [Enter].7 Check the network connection.Once connected, is displayed on the screen of the camera.@@ NOTEt ENCRYPTION in WEP is not supported.r Setting items in [NETWORK PROPERTY] when set to [INFRA(MANUAL)][ENCRYPTION] [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE](Factory setting: [WPA-AES])[ENCRYPT KEY] WPA2 encryption key(Factory setting: [01234567890123456789abcdef])[DHCP] Setting the DHCP functionf [OFF]: Does not use the DHCP function.f [CLIENT]: Acquire from DHCP when connecting with [TYPE] set to [INFRA(SELECT)] or[INFRA(MANUAL)].f [SERVER]: When connecting by setting [TYPE] to [DIRECT], enable the DHCP server function of thecamera. (Cannot be selected.)(Factory setting: [SERVER])[IP ADDRESS] IP address of the camera(Factory setting: [192.168.0.1])[SUBNET MASK] Subnet mask(Factory setting: [255.255.255.0])When connecting from the historyHistory of connection is saved when connected to a wireless access point. Connection is easily made with the same setting as before when connectingfrom the history.1 Select the [NETWORK SETTINGS] menu → [CONNECTION HISTORY] → [SELECT].The connection history is listed with the SSID of the wireless access point.