– 70 –Chapter 4 Operation — Menu setting contents[V-709] Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5][SCENE1], [SCENE2], [SCENE3],[SCENE4], [SCENE5]Outputs with the same color as the video recorded in the main recorder. This cannot be changed.(Factory setting: [V-Log])[USER SWITCHES]The function to assign the to buttons and multidial can be set.For details, refer to “Assigning function to the USER buttons”.Following functions can be assigned to [USER1] to [USER9].f [INHIBIT], [AWB], [ONE PUSH AF], [ONE PUSH A.IRIS], [ATW LOCK], [E.I.S.], [D.ZOOM], [IR SHOOTING], [REC SW], [PRE REC], [REC CHECK],[DEL LAST CLIP], [SLOT SEL], [EXPAND], [OPEN IRIS F.A.], [PEAK./SQUARES F.A.], [WFM], [SPOT METER], [ZEBRA], [LEVEL GAUGE], [LEVELGAUGE SET], [SDI COLOR], [HDMI COLOR], [LCD COLOR], [LCD CLEAN VIEW], [LCD MARKER], [COLOR BARS], [POWER LCD][USER1] Sets the function to assign to the button.(Factory setting: [ONE PUSH AF])[USER2] Sets the function to assign to the button.Assigned function is enabled when the VIEW screen is displayed.(Factory setting: [PEAK./SQUARES F.A.])[USER3] Sets the function to assign to the button.Assigned function is enabled when the VIEW screen is displayed.(Factory setting: [SPOT METER])[USER4] Sets the function to assign to the button.(Factory setting: [E.I.S.])[USER5] Sets the function to assign to the button.(Factory setting: [WFM])[USER6] Sets the function to assign to the button.(Factory setting: [AWB])[USER7] Sets the function to assign to the button.(Factory setting: [SLOT SEL])[USER8] Sets the function to assign to the button.(Factory setting: [EXPAND])[USER9] Sets the function to assign to the button.(Factory setting: [OPEN IRIS F.A.])[USER TOGGLE] Sets the function to assign to the multidial.Assigned function is enabled when the VIEW screen is displayed.The items that can be set are as follows.f [INHIBIT], [SHUTTER], [FPS], [MONITOR VOL](Factory setting: [MONITOR VOL])[SIDE LOCK][REC]Sets if the REC button is to be locked or not with the switch.[LOCK] It will be locked.[UNLOCK] It will not be locked.(Factory setting: [UNLOCK])[USER1]Sets if the button is to be locked or not with the switch.[LOCK] It will be locked.[UNLOCK] It will not be locked.(Factory setting: [LOCK])[USER2]Sets if the button is to be locked or not with the switch.[LOCK] It will be locked.[UNLOCK] It will not be locked.(Factory setting: [LOCK])[USER3]Sets if the button is to be locked or not with the switch.[LOCK] It will be locked.[UNLOCK] It will not be locked.(Factory setting: [LOCK])
