– 80 –Chapter 4 Operation — Menu setting contents[KNEE POINT]Sets the position of the knee point for HLG.The items that can be set are as follows.f [55%]…[109%] (1% steps)(Factory setting: [55%])[KNEE SLOPE]Sets the inclination of knee for HLG.The items that can be set are as follows.f [0]…[100](Factory setting: [10])[WHITE CLIP][SW]Switches the enable/disable of the white clip function.The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[LEVEL]Sets the level of the white clip.The items that can be set are as follows.f [90%]…[109%](Factory setting:[109%])[DETAIL][SW]Switches the enable/disable of the detail function.The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[CORING]Sets the level of coring against the detail.The items that can be set are as follows.f [0]…[60](Factory setting: [0])[MASTER LEVEL]Sets the level of the detail effect of the whole part.The items that can be set are as follows.f [−31]…[31](Factory setting: [0])[FREQUENCY]Sets the thickness of the detail.The items that can be set are as follows.f [1]…[3](Factory setting: [1])[SKIN DETAIL][SKIN DTL1]Selects the skin tone table of the subject to apply the skin tone, and enables/disables the skin tone detail function.The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[SKIN DTL2]Selects the skin tone table of the subject to apply the skin tone, and enables/disables the skin tone detail function.The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[SKIN DTL3]Selects the skin tone table of the subject to apply the skin tone, and enables/disables the skin tone detail function.
