Panasonic AU-EVA1E Operating Instructions Manual

Contents

– 85 –Chapter 4 Operation — Menu setting contents[INPUT1 MIC POWER]Enables/disables the phantom power supply for the external microphone connected to the

The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[INPUT2 MIC POWER]Enables/disables the phantom power supply for the external microphone connected to the

The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[INPUT1 MIC LEVEL]Sets the input level of the external microphone connected to the

[INPUT1 LINE/MIC SEL] of [AUDIO INPUT] is set to [MIC].The items that can be set are as follows.f [-40dB], [-50dB], [-60dB](Factory setting: [-60dB])[INPUT2 MIC LEVEL]Sets the input level of the external microphone connected to the

[INPUT2 LINE/MIC SEL] of [AUDIO INPUT] is set to [MIC].The items that can be set are as follows.f [-40dB], [-50dB], [-60dB](Factory setting: [-60dB])[INPUT1 LINE LEVEL]Sets the audio input level of the audio device connected to the

LINE/MIC SEL] of [AUDIO INPUT] is set to [LINE].The items that can be set are as follows.f [4dB], [0dB](Factory setting: [4dB])[INPUT2 LINE LEVEL]Sets the audio input level of the audio device connected to the

LINE/MIC SEL] of [AUDIO INPUT] is set to [LINE].The items that can be set are as follows.f [4dB], [0dB](Factory setting: [4dB])[AUDIO OUTPUT][MONITOR OUT]Sets the audio channel and the format to be output from the headphone terminal.[CH1] Outputs the signal for audio channel 1 as monaural.[CH2] Outputs the signal for audio channel 2 as monaural.[STEREO] Outputs the signals of the audio channel 1 and the audio channel 2 as stereo.[MIX] Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural.(Factory setting: [STEREO])[MONITOR DELAY]Sets if the audio from the headphone terminal is to be delayed to match the video on the LCD monitor.[LIVE] Outputs without delay.[RECORDING] Matches to the video on the LCD monitor.(Factory setting: [LIVE])[MONITOR VOL]Adjusts the level of audio output from the headphone terminal.The items that can be set are as follows.f [0]…[100](Factory setting: [70])[REC BEEP SOUND][MODE]Sets if the beep sound is generated when starting or stopping the recording.[OFF] The beep sound is not generated.