– 77 –Chapter 4 Operation — Menu setting contents[NORMAL2] Window that is around bottom of the screen.[CENTER] Window that is a spot around center of the screen.(Factory setting: [NORMAL1])[A. IRIS PEAK/AVE]Sets the ratio included in the peak for auto iris standard.The items that can be set are as follows.f [0]…[100](Factory setting: [30])[GRIP IRIS]Sets the control direction when the grip multidial is used to control the iris.[RIGHT OPEN] The iris will open when the grip multidial is turned clockwise.[LEFT OPEN] The iris will open when the grip multidial is turned counter-clockwise.(Factory setting: [RIGHT OPEN])[AF OFFSET]Offsets the focal position of the auto focus with + (further)/− (closer).The items that can be set are as follows.f [−20]…[20](Factory setting: [0])[IR SHOOTING]Enables/disables the IR recording.The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[E.I.S.][SW]Enables/disables the electronic image stabilization function.The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])[ZOOM POSITION DATA]Sets the focal distance of the lens required for the electronic image stabilization.[AUTO] Performs the electronic image stabilization using the focal distance information automatically.[MANUAL] Performs the electronic image stabilization using the focal distance set in [ZOOM POSITION VALUE].@@ NOTEt When setting to [AUTO], an EF lens supporting the acquisition of the focal distance with the communication between the camera and the lens isrequired.For the latest information regarding the EF lens supporting the acquisition of the focal distance information with the communication between thecamera and the lens, refer to the support desk at the following website.http://pro-av.panasonic.net/[ZOOM POSITION VALUE]Sets the focal distance (mm) used when [ZOOM POSITION DATA] is set to [MANUAL].The items that can be set are as follows.f [8]…[200]@@ NOTEt The electronic image stabilization will not operate properly when set to distance that is different from the focal distance of the EF lens.[AUTO BLACK BALANCE][ABB]Executes the adjustment of auto black balance.[EXECUTE] Executes automatic black balance.[EXIT] Returns to one level higher