Panasonic AU-EVA1E Operating Instructions Manual

Contents

– 96 –Chapter 4 Operation — Menu setting contents[NETWORK SETTINGS] menuSets the setting regarding the network function.[NETWORK SEL]Sets if the external equipment (PC, etc.) and the camera is to be connected to the network using the wireless LAN.[WLAN] Connects with wireless LAN.[OFF] Does not connect.(Factory setting: [OFF])[NETWORK FUNC][USER ACCOUNT]Sets the user account to be used for authentication in the network function of the camera.[ADD] Newly registers the user account. It is set as follows when not registered.User account name: “guest”, password: “auguest”[DELETE] Deletes the registered user account. This will not operate when not registered.[NETWORK PROPERTY][MAC ADDRESS]Displays the wireless LAN MAC address of the camera. (Cannot be changed)[TYPE]Sets the connection method to the wireless LAN.[DIRECT] It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tabletterminal.[INFRA(SELECT)] Connects to the wireless access point. The access point is selected from the list.[INFRA(MANUAL)] Connects to the wireless access point. Wireless access point is entered manually.(Factory setting: [DIRECT])[SSID]Enters or displays the network name of the camera (SSID).(Factory setting: [AU-EVA1])[BAND]Switches between two communication methods ([2.4GHz] or [5GHz]) when [NETWORK PROPERTY] → [TYPE] → [DIRECT] is selected.The items that can be set are as follows.f [2.4GHz], [5GHz](Factory setting: [2.4GHz])[CHANNEL(2.4GHz)]Sets the channel to be used when connected to the wireless LAN with following items set.f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [2.4GHz]The items that can be set are as follows.f [AUTO], [CH1], [CH6], [CH11](Factory setting: [AUTO])[CHANNEL(5GHz)]Sets the channel to be used when connected to the wireless LAN with following items set.f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [5GHz]The items that can be set are as follows.f [AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132], [CH136], [CH140], [CH149], [CH153], [CH157],[CH161], [CH165](Factory setting: [AUTO])@@ NOTEt Some items may not be able to select depending on the used wireless module.[ENCRYPTION]Sets the encryption method when [NETWORK PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.The items that can be set are as follows.f [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE](Factory setting: [WPA2-AES])