Panasonic AW-HE100E Operating Instructions Manual

Also see for AW-HE100E: Operating instructions

15 (E)How to turn the power on and offTurning the power onWhen performing the operations using theaccessory wireless remote control1 Set all the power switches of the unitsand devices connected in the system toON. This unit does not have a power switch.When power is supplied to it, the status display lampwill light up orange.2 Press one of the [CAM1] to [CAM4]buttons on the wireless remote control toselect the unit.3 Press the [ON/STANDBY] button on thewireless remote control for two seconds.The power of the unit is turned on, and the initialsettings operation is performed. The unit’s status display lamp now lights up green.4 If a multiple number of units are goingto be used, repeat steps 2 and 3 asrequired.The unit’s status display lamp blinks green when a signalmatched by the remote control ID has been received, andit blinks orange when a signal that is not matched by theremote control ID has been received.When performing the operationsusing the controller1 Set all the power switches of the unitsand devices connected in the system toON. This unit does not have a power switch.When power is supplied to it, the status display lampwill light up orange.2 Set the [OPERATE] switch on thecontroller to ON.The power of all the cameras connected to thecontroller (including the unit) is turned on, and initialsetup is performed. The unit’s status display lamp now lights up green.It takes about 30 seconds per unit for the initial settingsoperation to be completed. During this period, the unitcannot be operated.Before setting the [OPERATE] switch on the controller toON, be absolutely sure to set all the power switches of theunits and devices connected in the system to ON.For further details, refer to the Operating Instructions of thecontroller.