34 (E)ENGLISHBlack level (total pedestal) adjustment Black level (total pedestal)adjustmentThe black level can be adjusted when using a multiplenumber of cameras including the unit. Ask your dealer toperform this adjustment.(Use an oscilloscope or waveform monitor for theadjustment.)Adjust the black level in accordance with the units anddevices used.When performing the operations using theaccessory wireless remote controlWhen the accessory wireless remote control is used, theblack level can be adjusted only when the user mode hasbeen established.1 Press the [M/IRIS] button.Set the iris to the manual mode.2 Press the [IRIS–] button.The lens iris is stopped down.3 Select the user mode following the stepsin “Selecting the shooting modes (scenefiles)” (page 19).At this time, keep the “User Mode Set” sub-menu onthe display. User Mode Set Brightness SetColour SetG/L SetDetail SetOther SetInitializeReturn4 Press the [] or [] button to make“Colour Set” blink.5 Press the [] or [] button.The “Colour Set” sub-menu is displayed. Colour Set Chroma Level +1White Bal AWC APedestal +1PaintingR Gain +1B Gain +1Return6 Press the [] or [] button to make the“Pedestal” value blink.7 Press the [] or [] button to change thevalue.Adjust the black level to a value of 5 IRE (0.035 V) or7.5 IRE (0.050 V).8 Press the [MENU] button for twoseconds.The menu display is exited.9 If necessary, press the [A/IRIS] button toadjust the iris automatically.