Panasonic AW-HE100E Operating Instructions Manual

Also see for AW-HE100E: Operating instructions

52 (E)ENGLISHColour setting menu Colour setting menu for halogen lightmode, fluorescent light mode and daylightmode Colour Set Chroma Level +1White Bal ATWReturn1--------2--------3------1 Colour density adjustment[Chroma Level: –3 to +3](Factory setting: ±0; +2 for the user mode only)2 White balance selection[White Bal: ATW, AWC A, AWC B, 3200K, 5600K](Factory setting: ATW; AWC A for the user mode only)ATW: The white balance is adjusted automaticallyand continuously, and it is automaticallycorrected even when the light source or colourtemperature has changed.• If very bright objects (such as fluorescentlights) appear on the screen, the ATWfunction may not work properly.• The white balance may shift out ofadjustment if there are no white objects onthe screen.AWC A, AWC B:When AWC A or AWC B is selected and thewhite balance is adjusted, the resulting statusis stored in the memory. When the unit is usedunder the same conditions, the adjustmentstatus can be reproduced simply by selectingAWC A or AWC B, thus obviating the need forreadjustment.When a new status is stored in the memory,the previous status is erased from thememory.If AWC (auto white balance adjustment)or a manual white balance adjustment isperformed in the status selected by AWC A orAWC B, the resulting status will be stored inthe memory.3200K: The white balance that was adjusted under3200K lighting conditions (equivalent to ahalogen light) is established.5600K: The white balance that was adjusted under5600K lighting conditions (equivalent todaylight) is established.3 Return to the previous menu (menu forselecting the shooting mode) [Return] User mode colour setting menu Colour Set Chroma Level +1White Bal ATWPedestal ±0PaintingR Gain ±0B Gain ±0Return1--------2--------4--------5----------6----------3------(User mode only)4 Black level adjustment [Pedestal: –30 to +30](Factory setting: ±0)Using this item, the black level (pedestal level) of theluminance (Y) signal is set.Align the black level when using a multiple number ofcameras including the unit.5 Painting R gain adjustment [R Gain: –30 to +30](Factory setting: ±0)6 Painting B gain adjustment [B Gain: –30 to +30](Factory setting: ±0)When “AWC A” or “AWC B” has been selected as thewhite balance setting (White Bal), the white balancecan be finely adjusted after AWC (auto white balanceadjustment) has been executed.When AWC is executed, the setting is returned to ±0.Setting the menu items