24 (E)ENGLISHManual shootingManually adjusting the focusThe lens focus can be adjusted manually.When performing the operations using theaccessory wireless remote control1 Press the [M/FOCUS] button to switch thefocus to manual adjustment.2 Press the [F] or [N] button of [FOCUS],and adjust the focus.When the [F] button is pressed, the focus moves furtheraway (far); conversely, when the [N] button is pressed,it moves nearer (near).The speed of focusing and other adjustments canbe switched to fast or slow by pressing the [FAST] or[SLOW] button, respectively.3 If necessary, press the [A/FOCUS] buttonto return the focus to the automaticadjustment.When doing the adjustmentusing the controllerWhen the AW-RP655 is connected:1 Press the [EXT(AF)] button to switch thefocus to manual adjustment.2 Adjust the focus manually by turning thedial above the lit [FOCUS] lamp whetherit is the lamp of the [PAN/TILT] lever or[ZOOM] lever.Furthermore, every time the [SPEED] button ispressed, the speed of the focusing and otheradjustments can be switched to fast or slow.3 If necessary, press the [EXT(AF)] buttonto return the focus to the automaticadjustment.When the AW-RP555 is connected:1 Press the [EXT(AF)] button to switch thefocus to manual adjustment.2 Adjust the focus manually by tilting the[FOCUS] lever.Furthermore, every time the [SPEED] button ispressed, the speed of the focusing and otheradjustments can be switched to fast or slow.3 If necessary, press the [EXT(AF)] buttonto return the focus to the automaticadjustment.When the AW-RP400 is connected:1 Press the [EXT(AF)] button to switch thefocus to manual adjustment.2 Adjust the focus manually by turning the[FOCUS] dial near the [ZOOM] lever.Furthermore, the speed of the focusing can be adjustedby turning the [FOCUS] dial of [SPEED CONTROL].Turning the dial counterclockwise as far as it will go candisable all operations.3 If necessary, press the [EXT(AF)] buttonto return the focus to the automaticadjustment. When the focus is set to manual, the subject maygo out of focus during zooming. Therefore, the unitcomes with a function which compensates for this.(Focus compensation during zooming function)This function was set to ON at the factory.If the function has been set to OFF, either adjust thefocus, as required, after zooming or set the focus toauto. When the ON/OFF setting of auto focus (AF) isswitched from AW-RP400, use the OPTION SWafter allocating the “EXT” function to it.Notes