Panasonic AW-HE100E Operating Instructions Manual

Also see for AW-HE100E: Operating instructions

51 (E)Brightness setting menu Brightness setting menu for halogen lightmode, fluorescent light mode and daylightmode Brightness Set A.Iris Level +1Step 1/120Gain AutoAGC Max Gain 18dBReturn1--------2--------3--------4--------5------1 Video level adjustment [A. Iris Level: –4 to +4](Factory setting: ±0]The convergence level of the auto iris/auto gain increaseis adjusted here.2 Shutter step selection[Step: Off, 1/120, 1/250, 1/500, 1/1000, 1/2000](Factory setting: Off)Using this item, the shutter speed is selected (unit: sec.).Off: The electronic shutter is set to OFF.3 Gain adjustment[Gain: Auto, 0dB to 12dB, 15dB, 18dB](Factory setting: Auto; 0dB for the user mode only)Using this item, the light quantity is adjusted.Auto: The light quantity is adjusted automatically.(AGC: Auto Gain Control)The maximum gain is adjusted using the AGCmaximum gain selection “AGC Max Gain” item. If “Auto” is selected as the gain adjustment (Gain)setting when the manual setting has been selected forthe iris, the iris will be automatically changed to theautomatic setting. If the manual setting is selected for the iris when “Auto”has been selected as the gain adjustment (Gain)setting, the gain adjustment will be automaticallychanged to the last gain setting. If “Auto” is selected as the gain adjustment (Gain)setting, the light quantity may change suddenly(causing the image output to be subjected to ashock).Note4 AGC maximum gain selection[AGC Max Gain: 6dB, 12dB, 18dB, ---](Factory setting: 18dB)Using this item, the maximum gain when “Auto” has beenselected as the gain adjustment (Gain) setting is set.5 Return to the previous menu (menu forselecting the shooting mode) [Return] User mode brightness setting menu Brightness Set A.Iris Level +1Shutter Mode SynchroStep/Synchro 50.08HzGain AutoAGC Max Gain 18dBReturn1--------6--------7--------3--------4----------5------(User mode only)6 Shutter mode selection[Shutter Mode: Step, Synchro](Factory setting: Step)The camera operates at the shutter speed settingselected using the Shutter step/synchro scan setting(Step/Synchro) item.Step: The shutter speed is selected using theshutter step value.Synchro: The synchro scanning frequency is set.7 Shutter step/synchro scan setting[Step/Synchro: Off, 1/120, 1/250, 1/500, 1/1000,1/2000 or 50.08Hz to 250.00Hz](Factory setting: Off, 50.08Hz)Using this item, the shutter speed is set.When “Step” has been selected as the shutter modeselection (Shutter Mode) setting, then Off, 1/120 sec.,1/250 sec., 1/500 sec., 1/1000 sec. or 1/2000 is selectedas the shutter speed.Off: The electronic shutter is set to OFF.When “Synchro” has been selected as the shutter modeselection (Shutter Mode) setting, a scanning frequencyranging from 50.08 Hz to 250.00 Hz is set.When shooting subjects such as TV screens, thehorizontal bar noise can be reduced by adjusting thesynchro scanning frequency.Setting the menu items