Panasonic AW-HE100E Operating Instructions Manual

Also see for AW-HE100E: Operating instructions

55 (E) Other setting (Other Set) menu for the usermode (Other Set) Other Set Gamma NormalFocus AutoIris AutoFormat 1080iAspect ---Status OffComponent ---Focus ADJ With Zoom OnReturn9--------1--------2--------3--------4--------5--------6--------7--------8------(User mode only)9 Gamma correction level selection[Gamma: Low, Normal, High](Factory setting: Normal)Low: At this setting, the pictures are stable, andthe contrast is set to sharp.(The gamma curve inclines gently for thelow-brightness areas.)Normal: When “1080i” or “720p” has been selectedas the video format (Format), the settingsuited to HD shooting is established.With all other video formats, the settingsuited to SD shooting is established.High: At this setting, the gray scale of the darkareas increases in scope, and pictureswith light tones are displayed.The contrast is set to soft.(The gamma curve inclines sharply in thelow-brightness areas.)At the 3 video format selection (Format) item, the videoformat is not switched immediately even when the setting ischanged.The screen shown below on which to confirm the settingchanges appears when an operation involving a transferto another item has been performed (when the [] or []button is pressed). Other Set Focus AutoIris AutoFormat 1080i--------------------Change Setting?O.K.CANCEL--------------------ReturnExample: Halogen modeWhen “O.K.” is selected, the video format is changed, andthe other setting menu (Other Set) is restored.(Press the [] or [] button, select “O.K.”, and press the []or [] button.)If “CANCEL” is selected, the other setting menu (OtherSet) is restored without changing the video format, andthe settings established prior to the changes made aredisplayed.The video format is not changed even when the menu isclosed. Do not make a change to a video format that is notsupported by the connected monitor.Not only will the pictures not be displayed on themonitor properly but the menus will not be displayedeither.As a result, no further menu operations will bepossible, and neither will it be possible to performthe operations to return to the video format.In cases like this, connect a monitor that supportscomposite signals or the video format that has beenchanged, and then change the video format.NoteSetting the menu items