13RQT82031 Standby/on switch (Í/I) (➡ 18, 19)Press to switch the unit from on to standby mode or vice versa. Instandby mode, the unit is still consuming a small amount ofpower.2 Disc tray (➡ 22, 30)3 Connection for digital video (DV) camcorder (➡ 47)4 Lights when “FL Display” is set to “Bright” (➡ 56)5 SD card slot (➡ 6)6 Lights when the HDD, DVD or SD drive is selected7 Display (➡ below)8 Connection for camcorder etc. (➡ 47)9 Linked timer recordings with external equipment (➡ 29): Channel select (➡ 22); Open/close disc tray (➡ 22, 30)< Select drive (➡ 22, 30, 34)Drive changes each time you press [DRIVE SELECT].= Stop (➡ 22, 31)> Start play (➡ 30)? Start recording/Remote control signal sensor (➡ 22)Specify a time to stop recording (➡ 23)Rear panel terminals (➡ 15, 16)2 Transferring (dubbing) indicator3 Linked timer recordings with external equipment indicator4 D.MIX (multi-channel DVD-Audio only)When lit: Down-mixing (➡ 68) is possible.When off: The disc prevents down-mixing so only the two front channels can be played (➡ 10, Regarding DVD-Audio)5 Recording mode6 Disc type7 Lights when the HDD, DVD or SD drive is selected8 Main display section9 Timer recording indicatorMain unitHDD DVD SDEXT LINK CHDRIVESELECT RECS VIDEO IN VIDEO IN L/MONO -AUDIO IN-AV3 R/ k 1 . 31 . 3OPEN/CLOSEDV IN1 2 3 4 5 6 789 : ; < = > ?Opening the front panelPress down on thepart with your fingerThe unit’s displayXPSPLPEPCH DUB EXT D.MIXLink DVD AVCDRWRAMVRSD- +-PLAYRECDVDSDHDD REC PLAYPLAYHDD REC HDD PLAY HDD REC PLAY1 2 3 4 5 67 8 91 e.g.,[HDD]Recording Playback Recording/Playback13Control reference guide