Panasonic DMR-EH60 Operating Instructions Manual

Also see for DMREH60 - DVD RECORDER DECK: Operating instructions

Contents

57RQT8203Tabs Menus Options (Underlined items are the factory presets.)Connection TV Aspect (➡ 20) Set to match the type of televisionconnected.≥16:9 ≥4:3 ≥LetterboxProgressive (➡ 20) ≥On ≥OffTV System (➡ 61) ≥PAL ≥NTSCAV1 OutputSelects the output from the AV1 terminal.Select “RGB (without component)” for RGB output.Select “Video (with component)” or “S Video (with component)”for component output.≥Video (with component)≥S Video (with component)≥RGB (without component)AV2 SettingsSet to match the connected equipment.≥Press [ENTER] to show the following settings.AV2 InputSet to “RGB/Video” or “RGB” when receiving or recordingRGB output from external equipment.≥RGB/Video≥RGB≥Video≥S VideoAV2 ConnectionThis setting is fixed with “Ext” if you set “TV System” to“NTSC” (➡ 61).≥Decoder: When a decoder is connected to descramble thescrambled signals (e.g., C+decoder).≥Ext: When the VCR or a digital/satellite receiver isconnected.Ext LinkThis setting cannot be made when the “TV System” is set to“NTSC” (➡ 61).≥Ext Link 1: When a digital/satellite receiver which transmits aspecial control signal recordings via the 21-pinScart cable is connected.≥Ext Link 2: When external equipment with a timer function isconnected.Others Remote Control (➡ 21) ≥DVD 1 ≥DVD 2 ≥DVD 3ClockAuto Clock Setting (➡ 60)Manual Clock Setting (➡ 60)Power Save≥Refer to the following when “Power Save” is set to “On”.–“FL Display” is automatically set to “Automatic” (➡ 56).–The “Quick Start” function does not work. (It is automaticallyturned to “Off”.)–When the unit is off, Pay TV programmes cannot be watchedon the TV because the signal from the connected decoder isnot looped through. To watch them, turn on the unit.≥If “Quick Start” is set to “On”, “Power Save” is automaticallyturned to “Off”.≥On: Power consumption is minimized when the unit is turnedto standby (➡ 70).≥OffQuick StartThe Quick Start feature enables this unit to be ready to startrecording as quick as approx. 1 second§ after turning it on. Youcan start recording soon after deciding you want to recordsomething.§Only when recording to the HDD or DVD-RAM.≥If this is set to “On”, “Power Save” is automatically turned to“Off”.≥Startup takes up to a minute when:–You play a disc or start recording to discs other than DVD-RAM.–You want to make other operations.–The clock has not been set.≥On≥Off: Standby power consumption is less than when this isset to “On”.LanguageChoose the language for these menus and on-screenmessages.≥English ≥Deutsch ≥Français ≥Italiano≥Español ≥NederlandsShipping ConditionAll the settings except for the ratings level, ratings password andtime settings return to the factory preset. The timer recordingprogrammes are also cancelled.≥Yes≥NoDefault SettingsAll the settings other than the programmed channels, timesettings, country settings, language settings, disc languagesettings, ratings level, ratings password, remote control code,return to the factory presets.≥Yes≥NoChanging the unit’s settings57