Panasonic DMR-EH60 Operating Instructions Manual

Also see for DMREH60 - DVD RECORDER DECK: Operating instructions

Contents

37RQT8203§ Only when you have set “Progressive” to “On” in the SETUP menu(➡ 20).By using the FUNCTIONS window you may access the mainfunctions quickly and easily.1 While stoppedPress [FUNCTIONS].Functions displayed depend on the selected drive or type ofdisc.2 Press [3, 4] to select an item andpress [ENTER].≥If you select “To Others” and press [ENTER], the followingscreen appears.≥If you select “Return” and press [ENTER], you can return tothe previous screen.To exit the FUNCTIONS windowPress [FUNCTIONS].Press [STATUS].The display changes each time you press the button.≥TV audio typeSTEREO: STEREO/NICAM stereo broadcastM 1/M 2: Bilingual/NICAM dual-sound broadcastM 1:NICAM monaural broadcastPicture menu—Change the picture qualityPlayback NRReduces noise and picture degradation.Progressive§ (➡ 68)Select “On” to enable progressive output.Select “Off” if the picture is stretched horizontally.Transfer§ [When “Progressive” (➡ above) is set to “On”.]Select the method of conversion for progressive output to suitthe type of title being played (➡ 68, Film and video).When the output signal is PAL≥Auto:≥Video:Detects 25 frame-per-second film content andappropriately converts it.Select when using “Auto”, and the videocontent is distorted.When the output signal is NTSC≥Auto1(normal):≥Auto2:≥Video:Detects 24 frame-per-second film content andappropriately converts it.Compatible with 30 frame-per-second filmcontent in addition to 24 frame-per-secondfilm content. (Picture distortion may occurdepending on the content)Select when using “Auto1” and “Auto2”, andthe video content is distorted.AV-in NR (Only when AV1, AV2, AV3, AV4 or DV is selected)Reduces video tape noise while transferring (dubbing).≥Automatic: Noise reduction only works on picture inputfrom a video tape.≥On: Noise reduction works for input video.≥Off: Noise reduction is off. You can record the inputsignal as it is.Sound menu—Change the sound effectV.S.S.[HDD] [RAM] [-R] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›](Dolby Digital, MPEG, 2-channel or over only)Enjoy a surround-like effect if you are using two front speakersonly.≥Turn V.S.S. off if it causes distortion. (Check the surroundfunction on the connected equipment.)≥V.S.S. does not work for bilingual recordings.Dialog Enhancer[RAM] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›](Dolby Digital, 3-channel or over only, including a centre channel)The volume of the centre channel is raised to make dialogueeasier to hear.Other menu—Change the display positionPosition1–5: The higher the setting the lower the on-screen menumoves.FUNCTIONS windowStatus messagesDisc RemainingFUNCTIONS 30:00 SPHDDHDDDubbingRecordingPlaybackEPGTo OthersDIRECT NAVIGATORGUIDE Plus+TIMER RECORDINGDUBBINGENTER123 ShowViewRETURNDisc RemainingFUNCTIONS 30:00 SPHDDHDDDubbingRecordingPlaybackEPGTo OthersDIRECT NAVIGATORGUIDE Plus+TIMER RECORDINGDUBBINGENTER12 3 ShowViewFLEXIBLE RECSETUPReturnRETURNDISC MANAGEMENTPLAYLISTSDV AUTO REC13:50 XP18:53:50 11.10.π T1 0:05.14 XP π T2 0:00.10 XPRemainπRECPLAYSTEREOL RDVD RECHDD Selected drive/type of discTV audio type being received (➡ below)Recording or play status/input channelSelected audio typeAvailable recording time andrecording modeTitle number and elapsed time during play/Recording modeDate and timeNo displayRecording drive/Transfer (dubbing) progress indicatorTitle number and elapsed time duringrecording/Recording modeUsing on-screen menus/FUNCTIONS window and Status message37