6RQT8203Inserting, Removing the SD cardOnly insert or remove the SD card after turning the unit off.When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.Such action may result in malfunction or loss of the card’s contents.≥You can use SD Memory Cards with capacities from 8 MB to 1 GB (➡ 11).≥If you have an LCD/plasma television or LCD projectorUsing progressive output, you can enjoy high-resolution videorecorded on media such as DVD-Video. Connect this unit’scomponent video output terminals to your television and turn on theprogressive output setting (➡ 16, 20).≥If you have a regular television (CRT: cathode ray tube)Use component output with progressive “Off” (Factory setting ➡ 57),even if it is progressive compatible, because progressive output cancause some flickering. This is the same for multi system televisionsusing PAL mode.Opening the cover Inserting the card(Do not forget to close the cover. ➡ right)Removing the card Closing the coverPress down.ADAPTERIf you are using aminiSD TM card, insert itinto the miniSD TM cardadaptor that comeswith the card.Insert and remove thisadaptor from the unit.Press on the centre of thecard until it clicks intoplace.Insert the card label up withthe cut-off corner on the right.12Press on the centre ofthe card.Pull it straight out.Push up.Note to owners of progressive compatible PAL system televisionsCOMPONENTVIDEO OUTCOMPONENTVIDEO INProgressive outputCOMPONENTVIDEO OUTCOMPONENTVIDEO INProgressive output6Inserting, Removing the SD card / Note to owners of progressive compatible PAL system televisions
