Panasonic FP? Positioning Unit RTEX Technical Manual

Contents

7-37.2 3 5 B Functions of Configurator PM7.2.1 9 6 B OverviewThe Configurator PM is the Windows-compliant setting software for our FP2/FPΣ Positioning UnitRTEX.Copy & PasteCopies and pastes the data you are editing into Microsoft Excel, etc.Also, pastes the position data calculated in Microsoft Excel into Configurator PM.Parameters and data transferTransfers the setting parameter or positioning data to the positioning unit RTEX.Also, reads the parameters or positioning data within the positioning unit RTEX.Batch checking of parameters and dataChecks the contents of parameters and positioning data all at once.Jumps to the place automatically if there are parameters or data out of the range.Also, this function is automatically executed when sending parameters or positioning data to thepositioning unit RTEX.Verify functionVerifies the parameter or positioning data you are editing with the files on the disk or the settings valuesin the positioning unit RTEX.You can jump the cursor to the data with differences from the dialog of the result of verification.Search and Replace functionsThe search or replacement for data item each is possible. Twenty search strings and twenty replacestrings can be memorized, so it is convenient for the repeated search or replacement.Showing comments for all parameters and positioning dataShows the guidance for all parameters and positioning data when making the settings.Up to 100 one-byte characters of data comments can be input.Up to 100 one-byte characters (50 two-byte characters) of comments can be input for the positioningdata of 1 table each.It is useful for the revision or the control of programs.However, the comments cannot be stored within the positioning unit RTEX.Tool operationThe tool operation enables to check the operation at the time that the system is installed or the operationof setting parameters without any ladder program.Also, the teaching function is provided, which reflects the current position to the movement amount ofdata item.