14-88Num-ber Name Boolean Operand Description StepsF142P142Watchingdog timerupdateWDTPWDTS The time (allowable scan time for the system) ofwatching dog timer is changed to “S” × 0.1 (ms) forthat scan.3F143P143Partial I/OupdateIORFPIORFD1, D2 Updates the I/O from the number specified by “D1”to the number specified by “D2”.5F144 Serial datacommunica-tion controlTRNS S, n The COM port received flag (R9038) is set to off toenable reception.Beginning at “S”, “n” bytes of the data registers aresent from the COM port.5F145P145Data send SENDPSENDS1, S2, D, N Sends the data to another station in the network(MEWNET).9F146P146Data receive RECVPRECVS1, S2, N, D Receives the data to another station in the network(MEWNET).9F145P145Data send SEND S1, S2, D, N Sends the data to the slave station as the MODbus master.9F146P146Data receive RECV S1, S2, N, D Receives the data from the slave station as theMOD bus master.9F145P145Data send SEND S1, S2, D, N Sends the data to the slave station as theMEWTOCOL master.9F146P146Data receive RECV S1, S2, N, D Receives the data from the slave station as theMEWTOCOL master.9F147 Printout PR S, D Converts the ASCII code data in the area startingwith “S” for printing, and outputs it to the wordexternal output relay WY specified by “D”.5F148P148Self-diagnosticerror setERRPERRn(n: k100 toK299)Stores the self-diagnostic error number “n” in(DT9000 for FP0/FP-e/FP1/FP-M/FP3 or DT90000for FP0 T32/FPΣ/FP2/FP2SH/FP10SH), turnsR9000 on, and turns on the ERROR LED.3
