I/O AllocationFP05 − 55.3 Expansion I/O Unit5.3 Expansion I/O UnitUp to three expansion I/O units can be added.I/O numbers do not need to be set as I/Oallocation is performed automatically bythe FP0 control unit when an expansionI/O unit is added.The I/O allocation of expansion I/O unitis determined by the installation location.I/O numberType First expansion Secondexpansion Third expansionE8RS/E8RM Input: 4 points X20 to X23 X40 to X43 X60 to X63/Output: 4 points Y20 to Y23 Y40 to Y43 Y60 to Y63E8X Input: 8 points X20 to X27 X40 to X47 X60 to X67E8YT/E8YP Output: 8 points Y20 to Y27 Y40 to Y47 Y60 to Y67E16RS/E16RM/E16T/E16PInput: 8 points X20 to X27 X40 to X47 X60 to X67/ /E16T/E16P Output: 8 points Y20 to Y27 Y40 to Y47 Y60 to Y67E16X Input: 16 points X20 to X2F X40 to X4F X60 to X6FE16YT/E16YP Output: 16 points Y20 to Y2F Y40 to Y4F Y60 to Y6FE32T/E32P Input: 16 points X20 to X2F X40 to X4F X60 to X6F/Output: 16 points Y20 to Y2F Y40 to Y4F Y60 to Y6FA21 Input channel 0: 16pointsWX2(X20 to X2F)WX4(X40 to X4F)WX6(X60 to X6F)Input channel 1: 16pointsWX3(X30 to X3F)WX5(X50 to X5F)WX7(X70 to X7F)Output: 16 points WY2 (Y20 to Y2F) WY4 (Y40 to Y4F) WY6 (Y60 to Y6F)A80,TC4,TC8Input CH0, 2, 4, 6: 16pointsWX2(X20 to X2F)WX4(X40 to X4F)WX6(X60 to X6F)C ,TC8 Input CH1, 3, 5, 7: 16pointsWX3(X30 to X3F)WX5(X50 to X5F)WX7(X70 to X7F)A04V, A04I Input: 16 points WX2 (X20 to X2F) WX4 (X40 to X4F) WX6 (X60 to X6F),Output CH0, 2, 4, 6: 16pointsWY2(Y20 to Y2F)WY4(Y40 to Y4F)WY6(Y60 to Y6F)Output CH1, 3, 5, 7: 16pointsWY3(Y30 to Y3F)WY5(Y50 to Y5F)WY7(Y70 to Y7F)IOL Input: 32 points X20 to X3F X40 to X5F X60 to X7FOutput: 32 points Y20 to Y3F Y40 to Y5F Y60 to Y7F− The channel data of FP0−A80, TC4, TC8, A04V and A04I will switch and be read orwritten by a user program that contains the conversion data switch flag.− Please verify with the manual for the FP0 CC−Link Slave unit.Third expansionSecond expansionFirst expansionControl unit
